A derma phys ac global review năm 2024
|
It mattifies and exfoliates facial skin, providing hydration and comfort and offering a delicately scented fragrance. It is an excellent make-up base. Show A Derma - Phys-AC Global reduces excess oil, limits bacteria adhesion, alleviates and reduces irritation associated with redness and exfoliates and unclog pores. Contains in its formulation: - Extract of Oats Rhealba seedlings; - Zincol (anti-inflammatory); - AHA / BHA reference (salicylic acid, glycolic acid, lactic acid) in acid pH (3.5) and; - Compensating moisturizing agents, that provide comfort and restore the balance of the skin. Results: the imperfections disappear, the complexion becomes bright and the skin is hydrated. More Information Brand A Derma Applied once per day throughout the clean face. Phys-AC Global is a complete care product that benefits skin in two ways: skin avoids exposure to a high dose of active ingredients released all at once, and it enjoys long-lasting moisturising and comfort. Tolerance is optimised. This care product removes excess sebum, limits the adhesion of bacteria, (P.Acnes)*, soothes and minimises redness linked to irritation, exfoliates and removes deposits from pores. In addition, compensating moisturising agents provide comfort and restore the skin's balance. Benefits 2 in 1, the cream moisturizes the skin without greasing it for maximum comfort. Delicate fragrance High mattifying power thanks to the presence of micro-sebum absorbing beads. Clinically tested, after 6 weeks of use: Black points -61% Inflammatory buttons -32% Excess of sebum -36% Result: the complexion is brighter, mattified, and imperfections diminished. ApplicationApply one time per day on the face previously cleansed with a purifying foaming gel or a purifying micellar water. IngredientsSebolia → reduces sebum Rhealba® Oat Plantlet extract → soothes, limits the adhesion of bacteria/P.Acnes Zincol → soothes Standard AHA/BHA (Salicylic acid, glycolic acid, lactic acid) acid pH → keratolytic An active preparation for an optimum effectiveness/tolerance ratio that gradually releases the AHA/BHA. Increased mattifying power: presence of sebum-absorbing micro-balls that diffract light and blur out blemishes/bumps. perfumed texture that is quickly absorbed. The cream opaque the skin with a long-lasting effect. Non-comedogenic. Tolerance tested on acne skin from adolescents to adults. Uploaded by: gothsoul on 02/20/2021 Ingredients overviewWater (Aqua),Glycolic Acid,PPG-15 Stearyl Ether,Propylene Glycol,Cyclopentasiloxane,Cyclohexasiloxane,Polymethyl Methacrylate,Propylene Glycol Ceteth-3 Acetate,Glycerin,Sodium Hydroxide,Cetyl Alcohol,Lactic Acid,Arachidyl Alcohol,Polyacrylate-13,Glyceryl Stearate,PEG-100 Stearate,Salicylic Acid,Arachidyl Glucoside,Avena Sativa (Oat) Leaf/Stem Extract (Avena Sativa Leaf/Stem Extract),Behenyl Alcohol,BHT,Bisabolol,Cucurbita Pepo (Pumpkin) Seed Oil (Cucurbita Pepo Seed Oil),Dimethicone,Disodium EDTA,Fragrance (Parfum),Polyisobutene,Polysorbate 20,Pyridoxine Hcl,Sorbitan Isostearate,Zinc Gluconate Highlights
alcohol-freeKey IngredientsOther IngredientsSkim throughIngredient name what-it-doesirr.,com. ID-Rating Water (Aqua) solvent Glycolic Acid exfoliant, bufferingsuperstar PPG-15 Stearyl Ether emollient Propylene Glycol moisturizer/humectant, solvent0,0 Cyclopentasiloxane emollient, solvent Cyclohexasiloxane emollient, solvent Polymethyl Methacrylate Propylene Glycol Ceteth-3 Acetate emollient Glycerin skin-identical ingredient, moisturizer/humectant0,0 superstar Sodium Hydroxide buffering Cetyl Alcohol emollient, viscosity controlling2,2 Lactic Acid exfoliant, moisturizer/humectant, bufferingsuperstar Arachidyl Alcohol emollient, viscosity controlling Polyacrylate-13 Glyceryl Stearate emollient, emulsifying0,1-2 PEG-100 Stearate surfactant/cleansing, emulsifying0,0 Salicylic Acid exfoliant, anti-acne, soothing, preservativesuperstar Arachidyl Glucoside emulsifying, surfactant/cleansing Avena Sativa (Oat) Leaf/Stem Extract (Avena Sativa Leaf/Stem Extract) Behenyl Alcohol emollient, viscosity controlling BHT antioxidant, preservative Bisabolol soothinggoodie Cucurbita Pepo (Pumpkin) Seed Oil (Cucurbita Pepo Seed Oil) emollient Dimethicone emollient0,1 Disodium EDTA chelating Fragrance (Parfum) perfumingicky Polyisobutene viscosity controlling Polysorbate 20 emulsifying, surfactant/cleansing0,0 Pyridoxine Hcl Sorbitan Isostearate emulsifying0,1-2 Zinc Gluconate anti-acne, soothinggoodie A-Derma Phys-Ac Global Ingredients explained Also-called: Aqua | What-it-does: solvent Good old water, aka H2O. The most common skincare ingredient of all. You can usually find it right in the very first spot of the ingredient list, meaning it’s the biggest thing out of all the stuff that makes up the product. It’s mainly a solvent for ingredients that do not like to dissolve in oils but rather in water. Once inside the skin, it hydrates, but not from the outside - putting pure water on the skin (hello long baths!) is drying. One more thing: the water used in cosmetics is purified and deionized (it means that almost all of the mineral ions inside it is removed). Like this, the products can stay more stable over time.
We don't have description for this ingredient yet.
A super commonly used 5 unit long, cyclic structured silicone that is water-thin and does not stay on the skin but evaporates from it (called volatile silicone). Similar to other silicones, it gives skin and hair a silky, smooth feel. It's often combined with the non-volatile (i.e. stays on the skin) dimethicone as the two together form a water-resistant, breathable protective barrier on the skin without a negative tacky feel. A light-feeling, volatile (meaning it does not absorb into the skin but evaporates from it) silicone that gives skin a unique, silky and non-greasy feel. It has excellent spreading properties and leaves no oily residue or build-up. A so-called polymer microsphere, i.e. little spherical shaped particles from repeated subunits. Similar to other microsphere powders, it can scatter the light to give products a soft focus or blurring effect. It also works as a texture enhancer giving formulas an exceptional smoothness and a velvet touch. We don't have description for this ingredient yet.
Also-called: lye | What-it-does: buffering The unfancy name for it is lye. It’s a solid white stuff that’s very alkaline and used in small amounts to adjust the pH of the product and make it just right. For example, in case of AHA or BHA exfoliants, the right pH is super-duper important, and pH adjusters like sodium hydroxide are needed. BTW, lye is not something new. It was already used by ancient Egyptians to help oil and fat magically turn into something else. Can you guess what? Yes, it’s soap. It still often shows up in the ingredient list of soaps and other cleansers. Sodium hydroxide in itself is a potent skin irritant, but once it's reacted (as it is usually in skin care products, like exfoliants) it is totally harmless. A so-called fatty (the good, non-drying kind of) alcohol that does all kinds of things in a skincare product: it makes your skin feel smooth and nice (emollient), helps to thicken up products and also helps water and oil to blend (emulsifier). Can be derived from coconut or palm kernel oil.
A fatty alcohol (the non-drying type with a long oil loving chain of 20 carbon atoms) that is used to increase the viscosity of the formula and it also helps the oily and the watery parts to stay nicely mixed together (called emulsion stabilizing). A helper ingredient that functions as a film-forming polymer (big molecule from repeated subunits). It usually comes to the formula as part of a thickener-emulsifier trio paired with Polyisobutene and Polysorbate 20. The three togeather have excellent thickening properties with remarkable emulsifying-stabilising abilities. They also have a nice silicone feel with glide-on spreading. A super common, waxy, white, solid stuff that helps water and oil to mix together, gives body to creams and leaves the skin feeling soft and smooth. Chemically speaking, it is the attachment of a glycerin molecule to the fatty acid called stearic acid. It can be produced from most vegetable oils (in oils three fatty acid molecules are attached to glycerin instead of just one like here) in a pretty simple, "green" process that is similar to soap making. It's readily biodegradable. It also occurs naturally in our body and is used as a food additive. As cosmetic chemist Colins writes it, "its safety really is beyond any doubt". A very common water-loving surfactant and emulsifier that helps to keep water and oil mixed nicely together. It's often paired with glyceryl stearate - the two together form a super effective emulsifier duo that's salt and acid tolerant and works over a wide pH range. It also gives a "pleasing product aesthetics", so no wonder it's popular.
An ingredient that is created from the attachment of the water-loving sugar molecule, glucose, and an oil-loving 20 carbon long fatty chain. This makes it a partly water- and partly oil-soluble material, meaning it functions as an emulsifier helping oil and water to mix. Most often, it comes to the formula coupled with two fatty alcohol friends, Arachidyl and Behenyl alcohol, to make up an emulsifier trio trade named Montanov 202. As described by its manufacturer, the main thing of Montanonv 202 is that it gives creams a unique evanescent and light feel with a matt finish. It also leaves the skin soft, but not oily, is hypoallergenic and non-comedogenic making it perfect for both oily and sensitive skin formulas. We don't have description for this ingredient yet. A fatty alcohol (the non-drying type with a long oil loving chain of 22 carbon atoms) that is used to increase the viscosity of the formula and it also helps the oily and the watery parts to stay nicely mixed together (called emulsion stabilizing). It's the acronym for Butylated Hydroxy Toluene. It's a common synthetic antioxidant that's used as a preservative. There is some controversy around BHT. It's not a new ingredient, it has been used both as a food and cosmetics additive since the 1970s. Plenty of studies tried to examine if it's a carcinogen or not. This Truth in Aging article details the situation and also writes that all these studies examine BHT when taken orally. As for cosmetics, the CIR (Cosmetic Ingredient Review) concluded that the amount of BHT used in cosmetic products is low (usually around 0.01-0.1%), it does not penetrate skin far enough to be absorbed into the bloodstream and it is safe to use in cosmetics. Also-called: Alpha-Bisabolol | What-it-does: soothing It's one of the active parts of Chamomile that contains about 30% of bisabolol. It's a clear oily fluid that is used in skincare as a nice anti-inflammatory and soothing ingredient. We don't have description for this ingredient yet. What-it-does: emollient | Irritancy: 0 | Comedogenicity: 1 Probably the most common silicone of all. It is a polymer (created from repeating subunits) molecule and has different molecular weight and thus different viscosity versions from water-light to thick liquid. As for skincare, it makes the skin silky smooth, creates a subtle gloss and forms a protective barrier (aka occlusive). Also, works well to fill in fine lines and wrinkles and give skin a plump look (of course that is only temporary, but still, it's nice). There are also scar treatment gels out there using dimethicone as their base ingredient. It helps to soften scars and increase their elasticity. As for hair care, it is a non-volatile silicone meaning that it stays on the hair rather than evaporates from it and smoothes the hair like no other thing. Depending on your hair type, it can be a bit difficult to wash out and might cause some build-up (btw, this is not true to all silicones, only the non-volatile types). Super common little helper ingredient that helps products to remain nice and stable for a longer time. It does so by neutralizing the metal ions in the formula (that usually get into there from water) that would otherwise cause some not so nice changes. It is typically used in tiny amounts, around 0.1% or less. Also-called: Fragrance, Parfum;Parfum/Fragrance | What-it-does: perfuming Exactly what it sounds: nice smelling stuff put into cosmetic products so that the end product also smells nice. Fragrance in the US and parfum in the EU is a generic term on the ingredient list that is made up of 30 to 50 chemicals on average (but it can have as much as 200 components!). If you are someone who likes to know what you put on your face then fragrance is not your best friend - there's no way to know what’s really in it. Also, if your skin is sensitive, fragrance is again not your best friend. It’s the number one cause of contact allergy to cosmetics. It’s definitely a smart thing to avoid with sensitive skin (and fragrance of any type - natural is just as allergic as synthetic, if not worse!). A polymer (big molecule from repeated subunits) that's used as a gloss improver for lipsticks and lipglosses. Its stickiness also helps lip products to stay on longer. Combined with polyacrylate-13 and polysorbate 20, it forms a very effective tickener-emulsifier trio. It's a common little helper ingredient that helps water and oil to mix together. Also, it can help to increase the solubility of some other ingredients in the formula. We don't have description for this ingredient yet. What-it-does: emulsifying | Irritancy: 0 | Comedogenicity: 1-2 A handy helper ingredient that helps water and oil to mix nicely together, aka emulsifier. It is especially recommended for protective, baby care and general purpose emollient creams. It also helps to disperse insoluble particles (think color pigments or zinc/titanium dioxide sunscreen) nice and even in cosmetic formulas. If you are fighting acne and have looked into oral supplements, chances are that zinc gluconate sounds familiar to you. It is a zinc salt that has research proving it to be effective against inflammatory acne, though not quite as effective as the antibiotic minocycline (31.2% vs. 63.4% success rate). However, zinc supplements are easily available, have little-to-no side effects, so supplementing them with a 30mg per day dose can still be a good idea. As for smearing zinc gluconate all over your face, it is also not a bad idea. Zinc has multiple magic abilities: it is antibacterial (including evil, acne-causing P. acnes) and sebum-regulating (5α-reductase inhibitor), great for acne-prone skin types. It also stimulates antioxidant enzyme systems (mainly superoxide dismutase) and has nice wound healing abilities acting mainly in the first, proliferation phase. So great for skin types in need of healing and soothing. What about the gluconate part? It is there to promote the absorption and bioavailability of zinc and also plays a role in cellular regeneration (involved in the synthesis of ribose sugars, structural components of DNA and RNA). You may also want to take a look at...Normal (well kind of - it's purified and deionized) water. Usually the main solvent in cosmetic products. The most researched and well-known AHA exfoliant. It gently lifts off dead skin cells to reveal newer, fresher, smoother skin. In larger concentration (>10%) it's a proven collagen booster. A common glycol that improves the freeze-thaw stability of products. It's also a solvent, humectant and to some extent a penetration enhancer. It's a super commonly used water-thin volatile silicone that gives skin and hair a silky, smooth feel. A light-feeling, volatile silicone that gives skin a unique, silky and non-greasy feel. It has excellent spreading properties and leaves no oily residue or build-up. A microsphere powder that can scatter the light to give products a soft focus effect. It also works as a texture enhancer giving formulas an exceptional smoothness and a velvet touch. A real oldie but a goodie. Great natural moisturizer and skin-identical ingredient that plays an important role in skin hydration and general skin health. Lye - A solid white stuff that’s very alkaline and used in small amount to adjust the pH of the product. A fatty (the good, non-drying kind of) alcohol that makes your skin feel smooth and nice (emollient), helps to thicken up products and also helps water and oil to blend (emulsifier). A superstar AHA that not only exfoliates skin but is also a very good moisturizer. In higher concentration (10% and up) it can even improve skin firmness, thickness, and wrinkles. A fatty alcohol (the non-drying type with a long oil loving chain of 20 carbon atoms) that is used to increase the viscosity of the formula and it also helps the oily and the watery parts to stay nicely mixed together (called emulsion stabilizing). A film forming polymer that usually comes to the formula as part of a thickener-emulsifier trio paired with Polyisobutene and Polysorbate 20. Waxy, white, solid stuff that helps water and oil to mix together and leaves the skin feeling soft and smooth. A commonly used water-soluble surfactant and emulsifier. One of the gold standard ingredients for treating problem skin. It can exfoliate skin both on the surface and in the pores and it's a potent anti-inflammatory agent. An ingredient that is created from the attachment of the water-loving sugar molecule, glucose, and an oil-loving 20 carbon long fatty chain. This makes it a partly water- and partly oil-soluble material, meaning it functions as an emulsifier helping oil and water to mix. Most often, it comes to the formula coupled with two fatty alcohol friends, Arachidyl and Behenyl alcohol, to make A fatty alcohol (the non-drying type) that is used to increase the viscosity of the formula and stabilize emulsions. It's the acronym for Butylated Hydroxy Toluene. It's a common synthetic antioxidant that's used as a preservative.There is some controversy around BHT. One of the active parts of Chamomile that is used in skincare as a nice anti-inflammatory and soothing ingredient. A very common silicone that gives both skin and hair a silky smooth feel. It also forms a protective barrier on the skin and fills in fine lines. Also used for scar treatment. Super common little helper ingredient that helps products to remain nice and stable for a longer time. It does so by neutralizing the metal ions in the formula (that usually get into there from water) that would otherwise cause some not so nice changes. The generic term for nice smelling stuff put into cosmetic products so that the end product also smells nice. It is made up of 30 to 50 chemicals on average. A polymer (big molecule from repeated subunits) that's used as a gloss improver for lipsticks and lipglosses. Combined with polyacrylate-13 and polysorbate 20, it forms a very effective tickener-emulsifier trio. It's a common little helper ingredient that helps water and oil to mix together. Also, it can help to increase the solubility of some other ingredients in the formula. A handy helper ingredient that helps water and oil to mix nicely together. A zinc salt known for its soothing and wound healing properties as well as for its anti-acne properties. What are the benefits of aBenefit of A-Derma Phys-AC Perfect Anti-Blemish Fluid: Moisturizes, restores and purifies the skin. It restores the balance of the skin. Ultrafidian texture allows an application and fast penetration. It relieves the redness associated with irritation.nullA-Derma Phys-AC Perfect Anti-Blemish Fluid - Sohaticaresohaticare.com › products › phys-ac-perfect-anti-blemish-fluid-40-mlnull Is AA-Derma has high and recognized experience in the creation of safe and effective products, recommended by dermatologists and loyal consumers.nullA Derma - Dermocosmetics SweetCarewww.sweetcare.com › adermanull |
