Troubleshooting > Status Monitor Errors > Paper Size Mismatch/Paper Type Mismatch [Auto Tray Select]
Paper tray is not loaded with paper of the correct size or type.
Follow the procedure below:
- Change the paper settings.
See Tray Paper Setting.
- Print by Form Feed. Press [FormFeed], select a paper tray containing paper of the specified size or type, and then print.
- Cancel the print job. See Canceling Printing.
PreviousNext
Copyright © 2012, 2013, 2021
If the paper size or type does not match the print job's settings, the machine reports an error. There are two ways to resolve this error:
Continue printing using mismatched paper
Use the form-feed function to ignore the error and print using mismatched paper.
Reset the print job
Cancel printing.
- If the [Auto Continue] setting under [Machine Settings] is enabled, the machine ignores the paper type and size settings and prints on whatever paper is loaded. Printing stops temporarily when the error is detected, and restarts automatically after ten seconds.
- For details about [Auto Continue], see Machine Settings.